QDSRAYS UV101A It is a new type of 6-functional waterborne urethane acrylate for hard coatings without solvents. The product cures very fast

The curing speed is fast and the cured film exhibits high scratch resistance. Due to its low viscosity, it can be used as the main raw material for waterborne coatings using spray or drench.

QDSRAYS UV101A can be blended with other aqueous UV resins to increase the solids content and/or coating hardness of the coating.

and/or coating hardness.

Key Properties

QDSRAYS UV101A has the following properties

- Low viscosity

- White appearance

- Low cost

UV/EB cured coatings based on QDSRAYS UV101A have the following properties:

- High solid content

- Fast curing speed

- Very high surface hardness and scratch resistance

- Excellent stain resistance

- Can be applied directly to a variety of plastic substrates

The true performance of the UV/EB cured product also depends on the other components of the formulation, such as reactive thinners, additives and light

initiators, and curing conditions.

Recommended Applications:

UV/EB cured products prepared on the basis of QDSRAYS UV101A can be applied by direct or reverse roll coating, gravure printing, metering

coating, dip coating, drench coating, spraying, screen printing, etc.

QDSRAYS UV101A is recommended for energy-curable protective hard coatings of

- Consumer electronics (protective housings and displays)

- Optical films

- Metallic plastics

Product Specifications

- Appearance: White emulsion

- Solid content, %: ~65

- PH value: 3 ~ 6

- Specific gravity, g/cm3@25℃： 1.10

- Viscosity, cps@25℃：＜4000

-Storage and use

Storage and use

QDSRAYS UV101A

Before using this product, please consult the product's Safety Technical Instructions for safety, handling procedures and personal protection

related content.

The temperature range for storage of the product is ≥ 4°C and ≤ 40°C. Prevent the product from freezing in winter. Avoid direct exposure of the product to

High temperature environment. Direct light and radiation sources should be avoided, the storage environment should be well ventilated, and the storage containers should be sealed. Product extension

After the shelf life is extended, the product needs to be stirred to enable it to be redispersed. The product is stable when used and stored under normal conditions.

The storage period of the product is 6 months.

Precautions

Detailed information can be found in the raw material safety data sheet. The toxicological properties of this product have not been fully determined. Avoid product

The product is irritating to the skin and eyes and may cause

Avoid contact with eyes, skin and clothing. Wash thoroughly after use, maintain good ventilation and keep the container closed.

Before using this product or any of the products mentioned in this chapter, please refer to the relevant raw material safety data sheet for usage procedures

and protective facilities. Please refer to the raw material safety data sheet for emergency treatment and first aid procedures.