QDSRAYS UV101 is a new solvent-free 6-functional aqueous urethane acrylate for hard coating applications.

ester. The product cures quickly and the cured film exhibits high scratch resistance. Due to its low viscosity, it can be used as a base for

QDSRAYS UV101 can be blended with other aqueous UV resins to increase the solids and/or solids content of the coating.

QDSRAYS UV101 can be blended with other aqueous UV resins to increase the solid content of the coating and/or the hardness of the coating.

Key Properties

QDSRAYS UV101 has the following properties

- Low viscosity

- White appearance

UV/EB cured coatings prepared on the basis of QDSRAYS UV101 have the following properties:

- High solids content

- Fast curing speed

- Very high surface hardness and scratch resistance

- Good stain resistance

- Can be applied directly to various plastic substrates

The true performance of the UV/EB cured product also depends on the other components of the formulation, such as reactive thinners, additives and light

initiators, and curing conditions.

Suggested Applications:

UV/EB cured products prepared on the basis of QDSRAYS UV101 can be applied by direct or reverse roll coating, gravure printing, metering

coating, dip coating, drench coating, spraying, screen printing, and other coating methods.

QDSRAYS UV101 is recommended for energy-curable protective hard coatings of

- Consumer electronics (protective housings and displays)

- Optical films

- Metallic plastics

Product Specifications

- Appearance: White emulsion

- Solid content, %: ~65

- PH value: 3 ~ 6

- Specific gravity, g/cm3@25℃： 1.10

- Viscosity, cps@25℃：＜3000

Storage and use

QDSRAYS UV101

Before using this product, please consult the product's safety technical instructions for safety, handling procedures and personal protection.

related content.

The product storage temperature range is ≥ 4°C and ≤ 40°C. Prevent the product from freezing in winter. Avoid direct exposure of the product to

High temperature environment. Direct light and radiation sources should be avoided, the storage environment should be well ventilated, and the storage containers should be sealed. Product extension

After the shelf life is extended, the product needs to be stirred to enable it to be redispersed. The product is stable when used and stored under normal conditions.

The storage period of the product is 6 months.

Precautions

Detailed information can be found in the raw material safety data sheet. The toxicological properties of this product have not been fully determined. Avoid product

The product is irritating to the skin and eyes and may cause

Avoid contact with eyes, skin and clothing. Wash thoroughly after use, maintain good ventilation and keep the container closed.

Before using this product or any of the products mentioned in this chapter, please refer to the relevant raw material safety data sheet for usage procedures

and protective facilities. Please refer to the raw material safety data sheet for emergency treatment and first aid procedures.